【摘要】：涂料墙面轻质砖墙体_室内设计节点手册：常用节点重点/ KEY POINTS轻质砖墙砌筑好后用水泥砂浆粉刷，腻子找平，刷乳胶漆即可。After the light-weight brick wall being mortared and constructed, paint it with cement mortar, then level it with putty, and finally apply a coat of emulsion paint.三维图PERSPECTIVE重点/ KEY POINTS底层与面层石膏板必须错缝拼接安装；石膏板与石膏板交接缝隙以5mm左右为宜，然后采用腻子填缝，贴上绷带后进行批嵌。The base layer and surface layer of gypsum board should be installed by stitching joint. The gap between gypsum board should be 5mm around. Fill the gap with putty, affix bandage and fill with putty again.
重点/ KEY POINTS
轻质砖墙砌筑好后用水泥砂浆粉刷，腻子找平，刷乳胶漆即可。
After the light-weight brick wall being mortared and constructed, paint it with cement mortar, then level it with putty, and finally apply a coat of emulsion paint.
三维图 PERSPECTIVE
重点/ KEY POINTS
底层与面层石膏板必须错缝拼接安装；石膏板与石膏板交接缝隙以5 mm左右为宜，然后采用腻子填缝，贴上绷带后进行批嵌。
The base layer and surface layer of gypsum board should be installed by stitching joint. The gap between gypsum board should be 5 mm around. Fill the gap with putty, affix bandage and fill with putty again.
免责声明：以上内容源自网络，版权归原作者所有，如有侵犯您的原创版权请告知，我们将尽快删除相关内容。
